Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B3WM8 UN - PA6-MD40 - BASF

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - 材料特有の特性 - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

40 % mineral reinforced polyamide 6 injection moulding compound. It possesses high stiffness, dimensional stability and heat resistance combined with excellent processability as well as low warp and resistance to sink-mark formation. It is ideally suited for applications such as chrome platable door handles and fuel filler lids.

Processing/Physical Characteristics	乾燥/調湿	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	45 / *	cm³/10min	ISO 1133
温度	275 / *	°C	-
荷重	5 / *	kg	-
成形収縮率, 平行	1.0 / *	%	ISO 294-4, 2577
成形収縮率, 直角	0.9 / *	%	ISO 294-4, 2577

機械的特性	乾燥/調湿	単位	テスト基準
ISO データ
引張弾性率	6000 / 2000	MPa	ISO 527
破壊応力	85 / 45	MPa	ISO 527
破壊ひずみ	11 / 40	%	ISO 527
シャルピー衝撃強さ, +23°C	180 / 220	kJ/m²	ISO 179/1eU
シャルピー衝撃強さ, -30°C	120 / 110	kJ/m²	ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C	5 / 10	kJ/m²	ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C	4 / 3.5	kJ/m²	ISO 179/1eA

熱的特性	乾燥/調湿	単位	テスト基準
ISO データ
溶融温度, 10°C/min	220 / *	°C	ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa	100 / *	°C	ISO 75-1/-2
荷重たわみ温度, 0.45 MPa	190 / *	°C	ISO 75-1/-2
線膨張係数, 平行	57 / *	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	65 / *	E-6/K	ISO 11359-1/-2

その他の特性.	乾燥/調湿	単位	テスト基準
密度	1490 / -	kg/m³	ISO 1183

材料特有の特性	乾燥/調湿	単位	テスト基準
ISO データ
粘度数	145 / *	cm³/g	ISO 307, 1157, 1628

Processing Recommendation Injection Molding	値	単位	テスト基準
Processing humidity	≤0.15	%	-
樹脂温度	270 - 300	°C	-
金型温度	80 - 95	°C	-

機能

特殊な特性

成形加工法.

射出成形.

納入形状.

ペレット., ナチュラルカラー

添加剤.

離型剤.

領域別の利用可能性

北アメリカ., ヨーロッパ.

その他の情報

村遜速揃

PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 270 - 300 °C
injection molding, Mold temperature, range: 80 - 95 °C
injection molding, Mold temperature, recommended: 80 °C
injection molding, Dwell time, thermoplastics: 10 min

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.